HP Photosmart C4600 User Guide - Page 86
Solution 2: Place the original correctly on the glass
View all HP Photosmart C4600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 86 highlights
Chapter 10 Solution 2: Place the original correctly on the glass Solution: Load the original print side down on the right front corner of the glass as shown below. To copy a photo, position the photo on the glass so that the long edge of the photo is along the front edge of the glass. Cause: The original was placed incorrectly on the glass. If this did not solve the issue, try the next solution. Solution 3: Wipe the glass and the back of the document lid Solution: Turn off the product, unplug the power cord, and then use a soft cloth to wipe the glass and the back of the document lid. Cause: Debris might have been stuck on the glass or on the back of the document lid. The product interprets anything it detects on the glass as part of the image. The printout is blank Solution: Load the original print side down on the right front corner of the glass as shown below. Solve a problem 84 Solve a problem