HP ProLiant 4500 Compaq ProLiant 4500R Rack-Mountable Servers Maintenance and - Page 16
Removing the Y Brace and Card Bracket, Mass Storage Devices, Removable Media Storage Devices
View all HP ProLiant 4500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
2-4 Removal and Replacement Procedures Removing the Y Brace and Card Bracket Figure 2-2. Removing the Y Brace and Card Bracket 1. Unscrew the 1/4-turn release screws (3) on the Y brace and lift the brace out. 2. Unscrew the 1/4-turn release screw (1) on the card bracket and tilt the bracket up and then out. Mass Storage Devices The ProLiant 4500R Server has two areas for mass storage devices: the removable media area and Hot-Pluggable hard drive bays. Removable Media Storage Devices Figure 2-3. Removing a Storage Device from the Removable Media Area 1. Extend server out from the rack to the locked position and remove cover plate. 2. Remove Y brace and card bracket. Maintenance and Service Guide
2-4
Removal and Replacement Procedures
Maintenance and Service Guide
Removing the Y Brace and Card Bracket
Figure 2-2.
Removing the Y Brace and Card Bracket
1.
Unscrew the 1/4-turn release screws (3) on the Y brace and lift the brace out.
2.
Unscrew the 1/4-turn release screw (1) on the card bracket and tilt the bracket up and then
out.
Mass Storage Devices
The ProLiant 4500R Server has two areas for mass storage devices: the removable media area and
Hot-Pluggable hard drive bays.
Removable Media Storage Devices
Figure 2-3.
Removing a Storage Device from the Removable Media Area
1.
Extend server out from the rack to the locked position and remove cover plate.
2.
Remove Y brace and card bracket.