HP ProLiant 4500 Compaq ProLiant 4500R Rack-Mountable Servers Maintenance and - Page 53

Table 3-13, Tape Drive Test Error Codes

Get HP ProLiant 4500 PDF manuals and user guides View all HP ProLiant 4500 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 53 highlights

Diagnostic Tools 3-21 Error Code 1900-xx 1901-xx 1902-xx 1903-xx 1904-xx 1905-xx 1906-xx Table 3-13 Tape Drive Test Error Codes Description Tape ID failed Tape servo write failed Tape format failed Tape drive sensor test failed Tape BOT/EOT test failed Tape read test failed Tape write/read/compare test failed Recommended Action The following steps apply to error codes 1900-xx through 1906-xx: 1. Replace the tape cartridge and re-test. 2. Check and/or replace the signal cable and re-test. 3. Check the switch settings on the adapter board (if applicable). 4. Replace the tape adapter board (if applicable) and re-test. 5. Replace the tape drive and re-test. 6. Replace the system board and re-test. Maintenance and Service Guide

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
Diagnostic Tools
3-21
Maintenance and Service Guide
Table 3-13
Tape Drive Test Error Codes
Error
Code
Description
Recommended Action
1900-xx
1901-xx
1902-xx
1903-xx
1904-xx
1905-xx
1906-xx
Tape ID failed
Tape servo write failed
Tape format failed
Tape drive sensor test failed
Tape BOT/EOT test failed
Tape read test failed
Tape write/read/compare test failed
The following steps apply to error
codes 1900-xx through 1906-xx:
1.
Replace the tape cartridge
and re-test.
2.
Check and/or replace the signal
cable and re-test.
3.
Check the switch settings on the
adapter board (if applicable).
4.
Replace the tape adapter board
(if applicable) and re-test.
5.
Replace the tape drive
and re-test.
6.
Replace the system board
and re-test.