HP ProLiant 4500 Compaq ProLiant 4500R Rack-Mountable Servers Maintenance and - Page 37
Diagnostic Tools, Maintenance and Service Guide
View all HP ProLiant 4500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
Diagnostic Tools 3-5 POST Error Messages Continued Error Code Beeps Probable Source of Problem 207-Invalid Memory Configuration Check SIMM Installation None Memory module installed incorrectly. 208-Invalid Memory Speed - Check SIMM Installation 1L,1S The speed of the memory is too slow, where: xx00 = expansion board SIMMs are too slow, or 00yy = system board SIMMs are too slow. xx and yy have corresponding bit set. 211-Cache Switch Set Incorrectly None Switch not set properly during installation or upgrade. 212-System 1S Processor Failed/Mapped out Processor in slot x failed. 213-Cache size Error (ProSignia VS only) None Invalid optional cache size. 213-System 1S System processor Processor Not configured for slot Installed indicated is missing. 301-Keyboard Error None Keyboard failure. 301-Keyboard Error or Test Fixture Installed ZZ-301-Keyboard Error None None Keyboard failure. Keyboard failure. (ZZ represents the Keyboard Scan Code.) Action Verify placement of memory modules. The speed of the memory modules must be 60 or 70 ns. Verify the speed of the memory modules installed and replace. Verify switch settings. Run Diagnostics and replace failed processor. Replace cache with 256K cache. Install processor in the slot indicated or run the System Configuration Utility to remove the processor from the .CFG file. Turn off the computer, then reconnect the keyboard. Replace the keyboard. 1. A key is stuck. Try to free it. 2. Replace the keyboard. Continued Maintenance and Service Guide