HP ProLiant 4500 Compaq ProLiant 4500R Rack-Mountable Servers Maintenance and - Page 21
Cable Diagram for Internal Fast-Wide SCSI-2 Devices, and Removable Media Storage Devices
View all HP ProLiant 4500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
Removal and Replacement Procedures 2-9 Figure 2-7. Removable Media Storage Devices - Cable Folding and Routing Cable Diagram for Internal Fast-Wide SCSI-2 Devices and Removable Media Storage Devices Figure 2-8. Internal Fast-Wide SCSI-2 Devices and Removable Media Storage Devices - Cable Folding and Routing IMPORTANT: All SCSI hard drives on the same SCSI bus must be internal (within the server) or in an external storage system, but not both. A configuration with both internal and external SCSI hard drives requires more than one single-channel SCSI controller. A multi-channel controller, such as the Compaq SMART SCSI Array Controller, supports both internal and external SCSI hard drives on separate SCSI buses. IMPORTANT: All integrated 32-Bit SCSI-2 Controllers must be terminated by connecting one of the following to the Fast-SCSI-2 or Fast-Wide SCSI-2 connector on the system board: - Terminated SCSI cable - SCSI cable that is also attached to the lower SCSI-2 connector of a hot-pluggable backplane - 50-pin Active Terminator (Spare Part No. 169178-001) Maintenance and Service Guide