HP ProLiant 4500 Compaq ProLiant 4500R Rack-Mountable Servers Maintenance and - Page 28
Slide the base frame back all the way to access the power supply.
View all HP ProLiant 4500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
2-16 Removal and Replacement Procedures 7. Pull the bracket out and remove the power switch, safety interlock switch connectors, and cable from the bracket (refer to Figure 2-16). Figure 2-15. Removing the Power Supply 8. Slide the base frame back all the way to access the power supply. 9. Remove screws at sides (2) and rear (2) of the power supply. 10. Lift the power supply out, pulling the switch and cable through the chassis. 11. Reverse steps for replacement. NOTE: When replacing the power supply, make sure that the power switch cable is properly threaded through the bracket's strain relief as shown in Figure 2-16. Maintenance and Service Guide
2-16
Removal and Replacement Procedures
Maintenance and Service Guide
7.
Pull the bracket out and remove the power switch, safety interlock switch connectors, and
cable
from the bracket (refer to Figure 2-16).
Figure 2-15.
Removing the Power Supply
8.
Slide the base frame back all the way to access the power supply.
9.
Remove screws at sides (2) and rear (2) of the power supply.
10.
Lift the power supply out, pulling the switch and cable through the chassis.
11.
Reverse steps for replacement.
NOTE:
When replacing the power supply, make sure that the power switch
cable is properly threaded through the bracket’s strain relief as shown in
Figure 2-16.