HP ProLiant 4500 Compaq ProLiant 4500R Rack-Mountable Servers Maintenance and - Page 25
Processor and Option Boards
View all HP ProLiant 4500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
Processor and Option Boards Removal and Replacement Procedures 2-13 Figure 2-11. Removing the Processor and Option Boards To Replace Option Board 1. Extend server from the rack to the locked position. 2. Remove cover plate. 3. Remove Y brace. 4. Remove any cables connected to the option board. 5. Remove retaining screw and pull board straight out. 6. Reverse steps for option board installation. To Replace Processor Board 1. Extend server from the rack to the locked position. 2. Remove cover plate. 3. Remove Y brace and card bracket. 5. Pull board straight out. 6. Reverse steps for processor board installation. Maintenance and Service Guide
Removal and Replacement Procedures
2-13
Maintenance and Service Guide
Processor and Option Boards
Figure 2-11.
Removing the Processor and Option Boards
To Replace Option Board
1.
Extend server from the rack to the locked position.
2.
Remove cover plate.
3.
Remove Y brace.
4.
Remove any cables connected to the option board.
5.
Remove retaining screw and pull board straight out.
6.
Reverse steps for option board installation.
To Replace Processor Board
1.
Extend server from the rack to the locked position.
2.
Remove cover plate.
3.
Remove Y brace and card bracket.
5.
Pull board straight out.
6.
Reverse steps for processor board installation.