HP ProLiant 4500 Compaq ProLiant 4500R Rack-Mountable Servers Maintenance and - Page 26
System Boards
View all HP ProLiant 4500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
2-14 Removal and Replacement Procedures System Boards Figure 2-12. Removing the System Board 1. Extend server from the rack to the locked position. 2. Remove the cover plate. 3. Remove the Y brace and card guide brace. 4. Remove all boards including processor board, memory SIMMs, and expansion boards. 5. Disconnect all cables from the system board. 6. Remove the retaining screws and push the three I/O panel release tabs. 7. Slide the board toward the front of the chassis and lift the board out. 8. Reverse these steps to replace system board. Maintenance and Service Guide
2-14
Removal and Replacement Procedures
Maintenance and Service Guide
System Boards
Figure 2-12.
Removing the System Board
1.
Extend server from the rack to the locked position.
2.
Remove the cover plate.
3.
Remove the Y brace and card guide brace.
4.
Remove all boards including processor board, memory SIMMs, and expansion boards.
5.
Disconnect all cables from the system board.
6.
Remove the retaining screws and push the three I/O panel release tabs.
7.
Slide the board toward the front of the chassis and lift the board out.
8.
Reverse these steps to replace system board.