HP StorageWorks 1606 HP StorageWorks Fabric OS 6.3.0c Release Notes (5697-0361 - Page 57

In Access gateway mode, Port swap and Enable/Disable NPIV option

Page 57 highlights

In non-VF mode on DC SAN Director, after removing other filters (EE and F_Port TT) and enabling Fabric mode TopTalkers, the flow values are not reliable. Fixed in Fabric OS 6.3.0 HA Failover on DC SAN Director caused: Need to reboot the system for recovery, reason: System bring up timed out. Fixed in Fabric OS 6.3.0 Workaround prior to code change: Mannually block and unblock an E_Port to rebuild the fabric. In Access gateway mode,Port swap and Enable/Disable NPIV option Fixed in Fabric OS 6.3.0 is enabled in WebTools. As DCFM polling LUNs, the memory usage for weblinker is increased. Fixed in Fabric OS 6.3.0 FDMI: fdmid crashes when a brocade HBA with virtual ports is connected to a 4/256 SAN Director. Fixed in Fabric OS 6.3.0 Workaround prior to code change: Logout all the devices registered their HBA info and log them in after the fabric is stable. Brocade 8000 firmware download hot code load shows no identifier Fixed in Fabric OS 6.3.0 in the HTML page. Unable to activate a new PDCM Matrix with WebTools. Fixed in Fabric OS 6.3.0 Workaround prior to code change: Activate the same PDCM Matrix from WebTools, with "Active=Save Mode" checked from 'Edit CUP Port Connectivity Configuration' window. VCM don't have GUI capability to change SNMP read community configuration. 8/80 SAN Switch: Removing any power supply FRU causes fans to speed up for a short period (which is not expected). The SFP parameters are not returning for the ports which are under the logical switches other than the default logical switch. ptsupportshow -all does not function properly. Fixed in Fabric OS 6.3.0 Fixed in Fabric OS 6.3.0 Fixed in Fabric OS 6.3.0 Fixed in Fabric OS 6.3.0 Workaround prior to code change: Specify the slot number for which the command is directed. For example, ptsupportshow 1 -all command to see all ports on blade 1. WEBLINKERFCGD core files after weekend SAK/IRNDUP run on DC04 Fixed in Fabric OS 6.3.0 SAN Director. Applications cannot distinguish between Multiprotocol Router Blade and Core blades on DC SAN Director using SNMP. Need to add two Fixed in Fabric OS 6.3.0 new FRU classes: "coreblade" and "applicationblade" class. Switch panic in ficon enviormnet when blocking/unblocking E-Port due Fixed in Fabric OS 6.3.0 to RNID data count is incorrect. Switch Admin: when user moves to a different tab without applying changes, no warning is displayed. Fixed in Fabric OS 6.3.0 HP StorageWorks Fabric OS 6.3.0c Release Notes 57

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76

Fixed in Fabric OS 6.3.0
In non-VF mode on DC SAN Director, after removing other filters (EE
and F_Port TT) and enabling Fabric mode TopTalkers, the flow values
are not reliable.
Fixed in Fabric OS 6.3.0
Workaround prior to code change:
Mannually block and unblock an
E_Port to rebuild the fabric.
HA Failover on DC SAN Director caused: Need to reboot the system
for recovery, reason: System bring up timed out.
Fixed in Fabric OS 6.3.0
In Access gateway mode,Port swap and Enable/Disable NPIV option
is enabled in WebTools.
Fixed in Fabric OS 6.3.0
As DCFM polling LUNs, the memory usage for weblinker is increased.
Fixed in Fabric OS 6.3.0
Workaround prior to code change:
Logout all the devices registered their
HBA info and log them in after the
fabric is stable.
FDMI: fdmid crashes when a brocade HBA with virtual ports is connec-
ted to a 4/256 SAN Director.
Fixed in Fabric OS 6.3.0
Brocade 8000 firmware download hot code load shows no identifier
in the HTML page.
Fixed in Fabric OS 6.3.0
Workaround prior to code change:
Activate the same PDCM Matrix from
WebTools, with
Active=Save Mode
checked from
Edit CUP Port
Connectivity Configuration
window.
Unable to activate a new PDCM Matrix with WebTools.
Fixed in Fabric OS 6.3.0
VCM don
t have GUI capability to change SNMP read community
configuration.
Fixed in Fabric OS 6.3.0
8/80 SAN Switch: Removing any power supply FRU causes fans to
speed up for a short period (which is not expected).
Fixed in Fabric OS 6.3.0
The SFP parameters are not returning for the ports which are under
the logical switches other than the default logical switch.
Fixed in Fabric OS 6.3.0
Workaround prior to code change:
Specify the slot number for which the
command is directed. For example,
ptsupportshow 1 -all
command
to see all ports on blade 1.
ptsupportshow
-all does not function properly.
Fixed in Fabric OS 6.3.0
WEBLINKERFCGD core files after weekend SAK/IRNDUP run on DC04
SAN Director.
Fixed in Fabric OS 6.3.0
Applications cannot distinguish between Multiprotocol Router Blade
and Core blades on DC SAN Director using SNMP. Need to add two
new FRU classes: "coreblade" and "applicationblade" class.
Fixed in Fabric OS 6.3.0
Switch panic in ficon enviormnet when blocking/unblocking E-Port due
to RNID data count is incorrect.
Fixed in Fabric OS 6.3.0
Switch Admin: when user moves to a different tab without applying
changes, no warning is displayed.
HP StorageWorks Fabric OS 6.3.0c Release Notes
57