HP StorageWorks 8/80 Brocade Converged Enhanced Ethernet Administrator's Guide - Page 108
Advertising the optional LLDP TLVs
View all HP StorageWorks 8/80 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 108 highlights
7 LLDP configuration and management Example switch(conf-lldp)#description Brocade-LLDP-installed-july-25 Enabling and disabling the receiving and transmitting of LLDP frames By default both transmit and receive for LLDP frames is enabled. To enable or disable the receiving (rx) and transmitting (tx) of LLDP frames, perform the following steps from Privileged EXEC mode. 1. Enter the configure terminal command to enter global configuration mode. 2. Enter the mode command to: • Enable only receiving of LLDP frames: switch(conf-lldp)#mode rx • Enable only transmitting of LLDP frames: switch(conf-lldp)#mode tx • Disable all LLDP frame transmissions switch(conf-lldp)#mode no mode Configuring the transmit frequency of LLDP frames To configure the transmit frequency of LLDP frames, perform the following steps from Privileged EXEC mode.The default is 30 seconds. 1. Enter the configure terminal command to enter global configuration mode. 2. Enter LLDP configuration mode. switch(config)#protocol lldp 3. Configure the transmit frequency of LLDP frames. switch(conf-lldp)#hello 45 Configuring the hold time for receiving devices To configure the hold time for receiving devices, perform the following steps from Privileged EXEC mode. This configures the number of consecutive LLDP hello packets that can be missed before declaring the neighbor information as invalid. The default is 4. 1. Enter the configure terminal command to enter global configuration mode. 2. Enter LLDP configuration mode. switch(config)#protocol lldp 3. Configure the hold time for receiving devices. switch(conf-lldp)#multiplier 6 Advertising the optional LLDP TLVs NOTE If the advertise optional-tlv command is entered without keywords, all optional LLDP TLVs are advertised. To advertise the optional LLDP TLVs, perform the following steps from Privileged EXEC mode. 88 Converged Enhanced Ethernet Administrator's Guide 53-1001346-01