HP StorageWorks 8/80 Brocade Converged Enhanced Ethernet Administrator's Guide - Page 123
Creating a CoS-to-CoS mutation, Applying a CoS-to-CoS mutation QoS map
View all HP StorageWorks 8/80 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 123 highlights
Queueing 9 Creating a CoS-to-CoS mutation Perform the following steps from Privileged EXEC mode to create a CoS-to-CoS mutation. 1. Enter global configuration mode. switch#configure terminal 2. Create the CoS-to-CoS mutation QoS map name. In this example 'test' is used. switch(config)#qos map cos-mutation test 0 1 2 3 5 4 6 7 Example of creating a CoS-to-CoS mutation QoS map to swap CoS 4 and CoS 5 (i.e. inbound CoS 4 is mapped to outbound CoS 5 and inbound CoS 5 is mapped to outbound CoS 4) all other CoS passes through unchanged. switch:admin>cmsh switch>enable switch#configure terminal Enter configuration commands, one per line. End with CNTL/Z. switch(config)#qos map cos-mutation test 0 1 2 3 5 4 6 7 switch(config)#end 3. Enter the copy command to save the running-config file to the startup-config file. switch#copy running-config startup-config Applying a CoS-to-CoS mutation QoS map Perform the following steps from Privileged EXEC mode to apply a CoS-to-CoS mutation QoS map. 1. Enter global configuration mode. switch#configure terminal 2. Specify the 10-gigabit Ethernet interface. Example of selecting the 10-Gigabit Ethernet interface port 0/2. switch(config)#interface tengigabitethernet 0/2 3. Activate or apply changes made to the CoS-to-CoS mutation QoS map name. In this example 'test' is used. switch(config)#qos map cos-mutation test 0 1 2 3 5 4 6 7 Example of applying (activating) the CoS-to-CoS mutation QoS map on an interface. switch:amdin>cmsh switch>enable switch#configure terminal Enter configuration commands, one per line. End with CNTL/Z. switch(config)#interface tengigabitethernet 0/2 switch(conf-if-te-0/2)#qos cos-mutation test switch(conf-if-te-0/2)#exit switch(config)#end switch# 4. Enter the copy command to save the running-config file to the startup-config file. switch#copy running-config startup-config Converged Enhanced Ethernet Administrator's Guide 103 53-1001346-01