HP Tc4400 Reference Guide ProtectTools Security Manager - Page 57
Enabling and disabling Automatic DriveLock, hard drive protection
UPC - 883585078639
View all HP Tc4400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 57 highlights
BIOS Configuration for ProtectTools Enabling and disabling Automatic DriveLock hard drive protection When this option is enabled, the DriveLock passwords will be automatically generated and set in the drive, and protected by the TPM embedded security chip. ✎ The automatically generated passwords will not be set in the drive until the computer is restarted and you successfully enter the TPM embedded security password at the password prompt. The option to enable Automatic DriveLock is unavailable unless ■ The computer has a TPM security chip installed and initialized. For instructions on how to enable and initialize the TPM security chip, refer to "Enabling the embedded security chip" and "Initializing the embedded security chip" in Chapter 4, "Embedded Security for ProtectTools." ■ No DriveLock passwords have already been enabled. ✎ If you have already manually set DriveLock passwords on your computer, you must first disable them before you can set Automatic DriveLock protection. To enable or disable Automatic DriveLock protection: 1. Select Start > All Programs > HP ProtectTools Security Manager. 2. Select BIOS Configuration in the left pane. 3. Enter your Computer Setup setup password at the BIOS administrator password prompt, and then click OK. Reference Guide 5-7