Icom IC-R6 Instruction Manual - Page 21
Charger stand BC-194
View all Icom IC-R6 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
BATTERY CHARGING 2 r Rotate [DIAL] to select "Y," then push [BAND]. [DIAL] • The charging confirmation is displayed. t Rotate [DIAL] to select "Y," then push [BAND] to start the battery charging. Rotate Then, push • While charging, the icons show " ," " " and " (disappears)" in sequence, and "CHARGE" appears when the receiver's power is OFF. The icons and "CHARGE" disappear when the battery pack is completely charged. • It takes approximately 13 hours to fully charge the Ni-MH batteries. 1 D Charger stand BC-194 2 The BC-194 can be used as a convenient stand for the 3 receiver, as well as a charger when used the BC-196SA/SD, 4 BC-153SC or CP-18A/E as it's power source. 5 AC adapter Receiver 6 (supplied with receiver) 7 8 9 CP-18A/E cigarette lighter cable Ground screw and flat washer ʢspplied with BC-194ʣ BC-194 10 Cushion sheet 11 (supplied with BC-194) 12 13 14 15 Double-sided tape* (supplied with BC-194) 16 *One sheet supplied. You can cut the desired size. The BC-194 contains a line filter. If the ground screw is connected to earth ground, the BC-194 will reduce some noises from the power source.