Icom IC-R6 Instruction Manual - Page 24
Setting a frequency, Setting a tuning step
View all Icom IC-R6 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
3 FREQUENCY AND CHANNEL SETTING ■ Setting a frequency q Push [V/M] to select the VFO mode, if necessary. w Select a desired frequency band with [BAND]. • Or, while holding down [BAND], rotate [DIAL] to select a desired frequency band. e Rotate [DIAL] to select a desired frequency. • The frequency changes according to the preset tuning step. See the section to the right for setting the tuning step. • While holding down [FUNC], rotate [DIAL] to change the frequency in 1 MHz steps (default). [DIAL] [DIAL] changes the frequency according to the selected tuning step. While holding down [FUNC], rotating [DIAL] changes the frequency in 1 MHz steps (default). The MHz tuning step (dial select step) can be set to 100 kHz, 1 MHz or 10 MHz tuning steps in the Set mode. See page 17 for details. ■ Setting a tuning step The tuning step can be selected for each frequency band. However, �a�d�d�i�ti�o�n��a�l �s�t�e�p�s��b�e��c�o�m��e��s�e�l�e�c�t�a�b�l�e��in��o��n�l�y�t�h�e� VHF Air band (8.33 kHz) and in the AM broadcast band (9 kHz). T��h�e��f�o�l�lo��w�i�n�g��t�u�n�i�n�g��s�t�e�p��s��a�r�e��a�v�a��il�a�b�l�e��fo��r�t�h�e� IC-R6. • 5.0 kHz • 6.25 kHz • 8.33 kHz • 9.0 kHz • 10.0 kHz • 12.5 kHz • 15.0 kHz • 20.0 kHz • 25.0 kHz • 30.0 kHz • 50.0 kHz • 100.0 kHz • 125.0 kHz • 200.0 kHz D Tuning step selection q Push [V/M] to select the VFO mode, if necessary. w Push [BAND] to select a desired frequency band. • Or, while holding down [BAND], rotate [DIAL] to select a desired frequency band. e Push [TS] to enter the tuning step selecting mode. r Rotate [DIAL] to select a desired tuning step. t Push [TS] to return to the VFO mode. [DIAL] 5 kHz tuning step 11