Icom IC-R6 Instruction Manual - Page 52
Priority watch operation
View all Icom IC-R6 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
7 PRIORITY WATCH ■ Priority watch operation D Memory channel/memory scan watch q Select the VFO mode; then, set an operating frequency. w Select the channel(s) to be watched. For a memory channel watch: Select a desired memory channel. For a memory scan watch: ➥ Push [V/M] to select the memory mode. ➥ Hold down [SCAN](MODE) for 1 second to enter the scan type selection mode. ➥ Rotate [DIAL] to select a desired scan type, then push [SCAN](MODE) again to start the memory/bank scan. e Hold down [SET](TS) for 1 second to enter the Set mode. r Rotate [DIAL] to select the priority watch set item. t W hile holding down [FUNC], rotate [DIAL] to select "ON." • Select "BELL" if the priority beep function is desired. [DIAL] y Push [SET](TS) to exit the Set mode and start the watch. • The "PRIO" icon appears. • The receiver checks the memory/bank channel(s) every 5 seconds. • The watch resumes according to the selected scan resume setting. (p. 37) During priority watch Monitors the VFO frequency for 5 seconds. Pauses on a memory channel when a signal is received. During priority watch with the priority beep After 1 sec. Priority ON A beep tone sounds and the "S" icon blinks when a signal is received on a memory channel. u Push [SET](TS) to cancel the watch. 39