Icom IC-R6 Instruction Manual - Page 38

5 MEMORY CHANNELS ■ Memory clearing Contents of programmed memories can be cleared (erased), if desired. q H old down [S.MW](V/M) for 1 second to enter the select memory write mode. • 1 short and 1 long beep sounds. • The " " icon and memory channel number blink. • Do not hold down [S.MW](V/M) for more than 2 seconds. Otherwise the memory contents will be copied to the VFO. w R otate [DIAL] to select a desired memory channel to be cleared. e W hile holding down [MODE], rotate [DIAL] to select the "CLEAR" item. • The "CLEAR" item can also be selected by pushing [MODE] repeatedly. [DIAL] After released. r H old down [S.MW](V/M) for 1 second to clear the contents. • 3 beeps sound. • The cleared channel changes to a blank channel. • Return to the select memory write mode. The " " icon and memory channel number blink. Push and hold for 1 sec. t P ush [V/M] to return to the screen displayed before you entered the select memory write mode in step q. CONVENIENT!: Instead of doing steps e and r, while holding down [FUNC], pushing and holding [S.MW](V/M) for 1 second also clears the contents. BE CAREFUL! The contents of cleared memories CANNOT be recalled, even in the bank channel mode. • After releasing [MODE], "CLR" is displayed and the " blinks. " icon 25