Icom IC-R6 Instruction Manual - Page 56
Tone/DTCS squelch operation
View all Icom IC-R6 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
8 TONE SQUELCH AND POCKET BEEP ■ Tone/DTCS squelch operation q Set a desired frequency in the FM mode. w Hold down [SET](TS) for 1 second to enter the Set mode. e Rotate [DIAL] to select the "EXPAND" item. r W hile holding down [FUNC], rotate [DIAL] to turn the Expand set mode ON. t Rotate [DIAL] to select the "TSQL" item. y W hile holding down [FUNC], rotate [DIAL] to select a desired subaudible tone setting from "TSQLS," "TSQL," "DTCSS," "DTCS," "T SQL-R," "DTCS-R" or "OFF." u Push [SET](TS) to exit the Set mode. • Either "S T SQL," T SQL," "SDTCS," "DTCS," "T SQL-R" or "DTCS -R" appears, according to the tone selection in step y. Tone squelch with pocket beep DTCS squelch Tone squelch with pocket beep DTCS squelch Tone squelch Tone squelch (reverse) Tone squelch Tone squelch (reverse) DTCS squelch with pocket beep DTCS squelch (reverse) 43 DTCS squelch with pocket beep DTCS squelch (reverse) i W hen a signal with the matched tone is received, the squelch opens and audio is heard. When the pocket beep function is activated, the receiver also emits beep tones and blinks "S." • Beep tones sound and "S" blinks for 30 seconds. o Push [FUNC] to manually stop the beeps and blinking. • "S" disappears and the pocket beep function is deactivated. !0 T o cancel the tone squelch or DTCS, set the "TSQL" item to "OFF" in the Expand set mode, as described in step y.