Icom IC-R6 Instruction Manual - Page 93

80 POCKET GUIDE iR6 � VFO and memory mode selection � Push [V/M] to toggle between the VFO and the memory mode. � Receive mode selection � Push [MODE] repeatedly to select a desired mode. � Audio level setting � Push [Y] to increase the audio level, push [Z] to decrease it. � Squelch level setting � While holding down [SQL], rotate [DIAL] to set the squelch level. e Complete w Fold q Cut � Frequency band selection � Push [BAND] repeatedly, or hold down [BAND], rotate [DIAL] to select a desired frequency band. � Tuning step selection � Push [TS], then rotate [DIAL] to select a desired tuning step. • Push [TS] again to return to the previous screen. � Key lock function � While holding down [FUNC], push [ ](BAND) for 1 sec. to toggle the key lock function ON or OFF. • " " appears when the lock function is in use. � Attenuator function � While holding down [FUNC], push [ ](SQL) to toggle the attenuator ON or OFF. • "ATT" appears when the attenuator function is in use. POCKET 16 GUIDE Important operating instructions are summed up on this and the following page for your simple reference. By cutting along the line and folding on the dotted line, it will become a card sized operating guide which can easily be carried in a card case or wallet, etc. � Frequency setting q Push [V/M] to select the VFO mode. w Rotate [DIAL] to set a desired receive frequency. � Memory channel selection q Push [V/M] to select the memory mode. w Rotate [DIAL] to set a desired memory channel. • While holding down [FUNC], rotate [DIAL] changes the memory channel in 10 channel steps. � Memory bank channel selection q Push [V/M] to select the memory mode. w Push [BAND] repeatedly, or while holding down [BAND], rotate [DIAL] selects a desired bank. e Rotate [DIAL] to select a desired bank channel.