Icom IC-R6 Instruction Manual - Page 31
Memory Channels - software
View all Icom IC-R6 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
5 MEMORY CHANNELS ■ General description The receiver has 1300 memory channels for storage of often-used frequencies. A total of 22 memory banks, A to R, T, U, W and Y can be selected. Up to 100 channels can be assigned to each bank. D Memory channel contents The following information can be programmed into memory channels: • Receive frequency (p. 11) • Receive mode (p. 14) • Duplex direction (+DUP or -DUP) with a frequency off- set (p. 16) • Tone squelch or DTCS squelch ON/OFF (p. 43) • Tone squelch frequency or DTCS code with polarity (pp. 41, 42) • Tuning step (p. 11) • Attenuator function ON/OFF (p. 15) • Voice squelch control ON/OFF (p. 52) • AF filter ON/OFF (p. 55) • Scan skip setting (p. 35) • Memory bank (p. 20) • Memory name (p. 22) ■ Selecting a memory channel q P ush [V/M] to select the memory mode. • Push [V/M] to toggle between the VFO mode and the memory channel mode. w R otate [DIAL] to select a desired memory channel. 4 • Only programmed channels are displayed. 5 • While holding down [FUNC], rotate [DIAL] to select the memory channel in 10 channel steps. Appears Rotate [DIAL] to select the memory channel. NOTE: Memory data can be erased by static electricity, electric transients, etc. In addition, it can be erased by a malfunction and during repairs. Therefore, we recommend that memory data be written down or saved to a PC using the CS-R6 cloning software. 18