Icom IC-R6 Instruction Manual - Page 41

6 SCAN OPERATION ■ Scan types 1 2 Scanning automatically searches for signals and makes it easier to locate new stations. 3 4 FULL SCAN (p. 29) Repeatedly scans all frequen- SELECTED BAND SCAN Repeatedly scans all fre- cies over the entire band. (p. 29) quencies over the entire 5 100 1309.995 kHz MHz Band Some frequency ranges are edge Band selected band. edge 6 Scan not scanned, depending on Scan 7 the frequency coverage of the Jump receiver version. Jump 8 9 PROGRAMMED SCAN Repeatedly scans between MEMORY (SKIP) SCAN Repeatedly scans memory 10 (p. 29) two user-programmed fre- (p. 33) channels, except those set as Band Scan edges Band quencies. Used to check for SKIP skip channels. Skip channels 11 edge xxA xxB edge frequencies within a specified Scan range, such as repeater out- M 1 M 2 M 3 can be turned ON or OFF by M 0 pushing [FUNC] + [ ](V/M) M 4 12 put frequencies, etc. Jump SKIP in the memory mode. 13 M 199 M 6 M 5 14 ALL/SELECTED BANK Repeatedly scans all bank FREQUENCY/MEMORY Skips unwanted frequencies 15 SCAN (p. 33) SKIP channels or selected bank SKIP FUNCTION (p. 35) or channels that inconven- channels. The skip scan is Band Band iently stop scanning. This 16 A00 A01 A02 also selectable. edge edge function can be turned ON A99 A03 SKIP A98 A05 A04 Scan SKIP Jump SKIP or OFF by pushing [FUNC] + [ ](V/M) in either the VFO or the memory mode. 28