Icom IC-R6 Instruction Manual - Page 30
Dial select step
View all Icom IC-R6 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
4 BASIC OPERATION ■ Dial select step [ This receiver has a MHz tuning step for quick frequency setting. You can select 100 kHz, 1 MHz or 10 MHz steps, as desired. D Setting dial select step q Push [V/M] to select the VFO mode. w Hold down [SET](TS) for 1 second to enter the Set mode. e Rotate [DIAL] to select the "D SEL" item. • "D SEL" disappears after 1 second and "1M" (default) and "DS" appear. r W hile holding down [FUNC], rotate [DIAL] to select a desired dial select step. • 100 kHz, 1 MHz and 10 MHz can be selected. t Push [SET](TS) to exit the Set mode. [DIAL] 1 MHz step 10 MHz step 100 kHz step 17
17
4
BASIC OPERATION
■
Dial select step
±
[
This receiver has a MHz tuning step for quick frequency set-
ting. You can select 100 kHz, 1 MHz or 10 MHz steps, as
desired.
D
Setting dial select step
q
Push
[V/M]
to select the VFO mode.
w
Hold down
[SET]
(TS) for 1 second to enter the Set mode.
e
Rotate
[DIAL]
to select the “D SEL” item.
• “D SEL” disappears after 1 second and “1M” (default) and “DS”
appear.
r
While holding down
[FUNC]
, rotate
[DIAL]
to select a
desired dial select step.
• 100 kHz, 1 MHz and 10 MHz can be selected.
t
Push
[SET]
(TS) to exit the Set mode.
[DIAL]
1 MHz step
10 MHz step
100 kHz step