Icom IC-R6 Instruction Manual - Page 36
Selecting display type
View all Icom IC-R6 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
5 MEMORY CHANNELS ■ Selecting display type During memory mode operation, either the programmed bank name, memory name or the channel number can be displayed, instead of the frequency display. q Push [V/M] to select the memory mode. • If desired, push [BAND] repeatedly to select a desired bank group. w W hile holding down [FUNC], push [M.N](BAND) repeatedly to select the display type from frequency, bank name, memory name or the channel number. [DIAL] Frequency display D Selecting bank channel display During bank channel operation, the bank channel number can also be displayed, instead of the memory channel number. q Select the channel number display as described to the left. w W hile holding down [BAND], rotate [DIAL] to select a desired bank. • The bank can also be selected by pushing [BAND] repeatedly. Memory channel number display Bank channel number display When the selected memory channel has not been programmed with the bank name or memory name, the frequency is displayed. Bank name display Memory name display Channel number display Push Auto write channel number display Bank channel number display 23