Icom IC-R6 Instruction Manual - Page 70
Other Functions
View all Icom IC-R6 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 70 highlights
10 OTHER FUNCTIONS ■ Antenna selection The IC-R6 has an internal bar antenna installed for receiving AM broadcast band (0.495-1.620 MHz; varies depending on version) signals. In addition, the connected earphone cable can be used as an antenna for receiving strong signals. D Selecting antenna q Push [V/M] to select the VFO mode. w P ush [BAND] repeatedly, or while holding down [BAND] rotate [DIAL] to select a desired band. e Push [SET](TS) for 1 second to enter the Set mode. r Rotate [DIAL] to select the "ANT" item. • "ANT" disappears after 1 second and "EXT" (default) and "An" appear. [DIAL] After 1 sec. t W hile holding down [FUNC], rotate [DIAL] to select "BAR" when the Set mode has accessed from the AM broadcast band in AM mode; select "EAR" when the "ANT" item is selected for the strong signals. Bar antenna selection Earphone cable selection for 0.495-1.620 MHz band for strong signals y Push [SET](TS) to exit the Set mode. NOTES: • S ome noise or spurious may be received when the internal bar or earphone cable is used as an antenna. • The supplied or third party's antenna MUST BE con- nected to the antenna connector to receive signals other than strong signals, such as AM broadcast band or near by stations. • When receiving an AM broadcast signal with internal bar antenna, aim the receiver to better audio direction. • When the internal bar is used as an antenna, the attenuator function cannot be used. 57