Icom IC-R6 Instruction Manual - Page 66

Memory bank link function B-LINK, Program scan link function P-LINK

Get Icom IC-R6 PDF manuals and user guides View all Icom IC-R6 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 66 highlights

9 SET MODE D Memory bank link function (B-LINK) Turns the memory bank link function ON (default) or OFF. The link function provides continuous bank scan, scanning all channels in the selected banks during bank scan. D Program scan link function (P-LINK) Sets the program scan link function. During a program scan, the link function performs a continuous program scan in the selected program scan number. Default settings for LINK0 to LINK9; PROG 1 to PROG 24 are linked, but PROG 0 is not linked. • Bank link setting q Push [MODE] to enter the bank link setting mode. w Rotate [DIAL] to select a bank that you want to change the link setting. • Confirming a program scan link q Push [MODE] to enter the program scan link setting. e While holding down [FUNC], rotate [DIAL] to set the link setting ON or OFF. w Rotate [DIAL] to select the program scan link number that you want to confirm, then push [MODE]. • "LINK" appears. Setting is ON Setting is OFF r Repeat steps w and e until the bank link setting is finished. t Push [TS] to exit the bank link setting mode. e Push [MODE], then rotate [DIAL] to confirm the linked program scans. r Push [TS] three times to exit the program scan link setting. 53

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
53
9
SET MODE
D
Memory bank link function (B-LINK)
Turns the memory bank link function ON (default) or OFF.
The link function provides continuous bank scan, scanning
all channels in the selected banks during bank scan.
• Bank link setting
q
Push
[MODE]
to enter the bank link setting mode.
w
Rotate
[DIAL]
to select a bank that you want to change
the link setting.
e
While holding down
[FUNC]
, rotate
[DIAL]
to set the link
setting ON or OFF.
Setting is ON
Setting is OFF
r
Repeat steps
w
and
e
until the bank link setting is fin-
ished.
t
Push
[TS]
to exit the bank link setting mode.
D
Program scan link function (P-LINK)
Sets the program scan link function. During a program scan,
the link function performs a continuous program scan in the
selected program scan number.
Default settings for LINK0 to LINK9;
PROG 1 to PROG 24 are linked, but PROG 0 is not linked.
• Confirming a program scan link
q
Push
[MODE]
to enter the program scan link setting.
w
Rotate
[DIAL]
to select the program scan link number
that you want to confirm, then push
[MODE]
.
• “LINK” appears.
e
Push
[MODE]
, then rotate
[DIAL]
to confirm the linked
program scans.
r
Push
[TS]
three times to exit the program scan link setting.