KitchenAid KSM100PSWW Use & Care Guide - Page 21

General Instructions

Get KitchenAid KSM100PSWW - Ultra Power Plus Stand Mixer PDF manuals and user guides
UPC - 883049036908
View all KitchenAid KSM100PSWW manuals
Add to My Manuals
Save this manual to your list of manuals

Page 21 highlights

ENGLISH GENERAL INSTRUCTIONS To Attach 1. Turn the speed control to OFF. 2. Unplug mixer or disconnect power. 3. Loosen the attachment knob by turning it counterclockwise, and remove the attachment hub cover or flip up hinged hub cover. 4. Insert the attachment shaft housing into the attachment hub, making certain the attachment power shaft fits into the square attachment hub socket. It may be necessary to rotate the attachment back and forth. When the attachment is in proper position, the pin on the attachment will fit into the notch on the hub rim. 5. Tighten the attachment knob by turning it clockwise until the attachment is completely secured to mixer. To Remove 1. Turn the speed control to OFF. 2. Unplug mixer or disconnect power. 3. Loosen the attachment knob by turning it counterclockwise. Rotate the attachment slightly back and forth while pulling it out. 4. Replace the attachment hub cover. Tighten attachment knob by turning it clockwise. WARNING Electrical Shock Hazard Plug into a grounded 3 prong outlet. Do not remove ground prong. Do not use an adapter. Do not use an extension cord. Failure to follow these instructions can result in death, fire, or electrical shock. 6. Plug into a grounded 3 prong outlet. 19

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
19
ENGLISH
GENERAL INSTRUCTIONS
To Attach
1.
Turn the speed control to OFF.
2.
Unplug mixer or disconnect power.
3.
Loosen the attachment knob by
turning it counterclockwise, and
remove the attachment hub cover
or flip up hinged hub cover.
4.
Insert the attachment shaft housing
into the attachment hub, making
certain the attachment power shaft
fits into the square attachment hub
socket. It may be necessary to
rotate the attachment back and
forth. When the attachment is in
proper position, the pin on the
attachment will fit into the notch on
the hub rim.
5.
Tighten the attachment knob
by turning it clockwise until the
attachment is completely secured
to mixer.
6.
Plug into a grounded
3 prong outlet.
To Remove
1.
Turn the speed control to OFF.
2.
Unplug mixer or disconnect power.
3.
Loosen the attachment knob by
turning it counterclockwise. Rotate
the attachment slightly back and
forth while pulling it out.
4.
Replace the attachment hub cover.
Tighten attachment knob by turning
it clockwise.
Electrical Shock Hazard
Plug into a grounded
3 prong outlet.
Do not remove
ground prong.
Do not use an adapter.
Do not use an
extension cord.
Failure to follow these
instructions can result
in death, fire, or
electrical shock.
WARNING