Konica Minolta bizhub 20 bizhub 20 User Guide - Page 57
BT Call Sign (U.K. only), Connecting an external TAD
View all Konica Minolta bizhub 20 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 57 highlights
Chapter 7 BT Call Sign (U.K. only) 7 The BT Call Sign subscriber service is a way to have a separate number for your machine, it allows you to have at least two separate telephone numbers on one phone line. Each phone number has its own distinctive ringing pattern. You can set up your machine so that it only responds to the second number. When you set the BT Call Sign feature to ON, the receive mode is set to Manual automatically. Manual mode will not respond to incoming telephone calls, since the number you use for telephone calls will use the normal ring pattern. If you turn the feature off, your receive mode will remain on Manual. To enable the machine to work with BT Call Sign 7 This feature will only work with your external phone. a Press Menu, 2, 0, 2. The screen displays the current setting. b Press a or b to choose On or Off. Press OK. c Press Stop/Exit. Connecting an external TAD 7 You can connect an external Telephone Answering Device (TAD) to the same line as your machine. When the TAD answers a call, your machine will "listen" for the CNG (fax calling) tones sent by a sending fax machine. If it hears them it will take over the call and receive the fax. If it does not hear them, it will let your TAD take a voice message and the display will show Telephone. The external TAD must answer within four rings (we recommend you set it to two rings). This is because your machine cannot hear the CNG tones until the external TAD has picked up the call. The sending machine will send CNG tones for only eight to ten seconds longer. We do not recommend using the toll saver feature on your external TAD if it needs more than four rings to activate it. Note If you have problems receiving faxes, reduce the ring delay setting on your external TAD. 48