Konica Minolta bizhub 20 bizhub 20 User Guide - Page 61
Using a non-KONICA MINOLTA cordless external handset, Using Remote Codes, Remote Activation Code
View all Konica Minolta bizhub 20 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 61 highlights
Chapter 7 Using a non-KONICA MINOLTA cordless external handset 7 If your non-KONICA MINOLTA cordless telephone is connected to the telephone line cord (see page 51) and you typically carry the cordless handset elsewhere, it is easier to answer calls during the Ring Delay. If you let the machine answer first, you will have to go to the machine so you can press Tel/R to transfer the call to the cordless handset. Using Remote Codes 7 Remote Activation Code 7 If you answer a fax call on an extension or external telephone, you can tell your machine to receive it by pressing the Remote Activation Code l51. Wait for the chirping sounds then replace the handset. (See Fax Detect on page 44.) Your caller will have to press start to send the fax. If you answer a fax call at the external telephone, you can make the machine receive the fax by pressing Start. Remote Deactivation Code 7 If you receive a voice call and the machine is in F/T mode, it will start to sound the F/T (double-ring) after the initial ring delay. If you pick up the call on an extension telephone you can turn the F/T ring off by pressing #51 (make sure you press this between the rings). If the machine answers a voice call and pseudo/double-rings for you to take over, you can take the call at the external telephone by pressing Tel/R. Turning on the Remote Codes 7 You need to turn the Remote Codes setting to on to use the Fax Receive Code and Telephone Answer Code. a Make sure you are in Fax mode. b Press Menu 2, 1, 4. Press OK. c Press a or b to choose On. d If you do not want to change the Fax Receive Code, press OK. e If you do not want to change the Telephone Answer Code, press OK. f Press Stop/Exit. Changing the Remote Codes 7 The preset Remote Activation Code is l51. The preset Remote Deactivation Code is #51. If you are always disconnected when accessing your External TAD, try changing the three-digit remote codes, for example ### and 555. a Make sure you are in Fax mode. b Press Menu 2, 1, 4. c Press a or b to choose On or Off. Press OK. d If you chose On in step c, enter the new Remote Activation Code. Press OK. e Enter the new Remote Deactivation Code. Press OK. f Press Stop/Exit. 52