Konica Minolta bizhub C280 bizhub C220/C280/C360 Print Operations User Guide - Page 43
To use the LPR/Port9100 protocol, select [Standard TCP/IP Port].
View all Konica Minolta bizhub C280 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
5.1 Windows Vista/Server 2008 5 In Windows Server 2008: The [Add Printer] wizard appears. 5 Click [Add a local printer]. The page for [Choose a printer port] appears. 6 Click [Create a new port:], and then select the port type. % To use the LPR/Port9100 protocol, select [Standard TCP/IP Port]. % To use the SMB connection, select [Local Port]. 7 Click [Next]. 8 Specify the IP address and port. % To use the LPR/Port9100 protocol, select [TCP/IP Device], and then enter the IP address. % To use the SMB connection, enter "\\NetBIOS name\print service name" in the [Port Name] box. % Enter the same NetBIOS name and print service name specified in [Print Settings] in [SMB Settings]. 9 Click [Next]. % If the [Additional Port Information Required] dialog box appears, go to Step 10. % If the [Install the printer driver] dialog box appears, go to Step 13. 10 Select [Custom], and then click [Settings...]. 11 Change the settings according to the port, and then click [OK]. % For LPR connection, select [LPR], and then enter "Print" in the [Queue Name:] box. % You must discriminate between upper and lower case letters when entering it. % For Port9100, select [Raw], and then enter a RAW port number (initial setting: [9100]) in the [Port Number:] box. % If both LPR and Port9100 are enabled on this machine, the printer driver is connected to this ma- chine using LPR. 12 Click [Next]. The [Install the printer driver] page appears. bizhub C360/C280/C220 5-6