Kyocera FS 1020D FS-1020D Operation Guide Rev 1.4 - Page 24
CLEANER HOME POSITION, If the charger cleaner knob is not restored to its home position marked
View all Kyocera FS 1020D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
Cleaning the Printer 4 Slide the charger cleaner knob (green-colored) back and forth 2 to 3 times, then return it to its CLEANER HOME POSITION . Charger Cleaner Knob Figure 2-12 After cleaning, make sure you restore the charger cleaner to its home position. If the charger cleaner knob is not restored to its home position (marked CLEANER HOME POSITION ), a black band will print along the length Note of the page the next time you use the printer. 5 After cleaning is done, put the process unit back in the printer. To do so, carefully align the guides at both ends of the process unit with the slots in the printer. Figure 2-13 Process Unit 2-8
Cleaning the Printer
2-8
4
Slide the charger cleaner knob (green-colored) back and forth 2 to 3
times, then return it to its
CLEANER HOME POSITION
.
Figure 2-12
After cleaning, make sure you restore the charger cleaner to its home
position.
If the charger cleaner knob is not restored to its home position (marked
CLEANER HOME POSITION
), a black band will print along the length
of the page the next time you use the printer.
5
After cleaning is done, put the process unit back in the printer. To do
so, carefully align the guides at both ends of the process unit with
the slots in the printer.
Figure 2-13
Charger Cleaner Knob
Process Unit