Kyocera FS 1020D FS-1020D Operation Guide Rev 1.4 - Page 39
Normal Indicator Display, Indicator, KM-NET for Clients display, Description
View all Kyocera FS 1020D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
Indicators 3.3.4 Normal Indicator Display The following displays appear during normal printer operation. Indicator KM-NET for Clients display Cancelling data Description Data inside the printer is being canceled. The indicators light in sequence from the top, then go off in sequence from the bottom. This process is repeated twice. When the printer is switched on for the first time after the toner container is installed, (Adding toner) also appears. Please wait The printer is warming up and is not ready to print. The indicators light in sequence twice from top to bottom. When the printer is switched on for the first time after the toner container is installed, (Adding toner) also appears. Processing The printer is receiving data. Processing Waiting Form Feed Timeout Ready The printer is processing data. The printer is waiting for the end-of-job command before printing the last page. Pressing the key allows you to obtain the last page immediately. The printer is printing the last page after a waiting period. The printer is ready to print. Sleeping Table 3-6 The printer is offline. The printer stores but does not print received data. The printer is in sleep mode. The indicator flashes at 5-second intervals and all other indicators go off. The printer wakes from Sleep mode whenever a key on the operator panel is pressed, the cover is opened or closed, or data is received. The printer then warms up and goes online. (You can set the amount of time before the printer enters sleep mode from the KM-NET for Clients utility.) 3-14