Kyocera FS 1020D FS-1020D Operation Guide Rev 1.4 - Page 92
KIR Kyocera Image Refinement, Kyocera Printer Description
View all Kyocera FS 1020D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 92 highlights
Glossary Cassette mode This is an operation mode for the MP tray. When this mode is used, approximately 50 sheets of plain paper can be fed continuously, the same as for the cassette. IEEE1284 This is a standard used when connecting a printer to a computer, and was established by the Institute of Electrical and Electronic Engineers in 1994. dpi (dots per inch) This indicates the number of dots printed per inch, and is the unit of printer resolution. EcoPrint This is a printing mode that controls toner consumption. Pages printed in the EcoPrint mode are lighter than pages printed in the normal mode. The default setting is Off. Emulation This refers to emulation of manufacturers' printers. The printer emulates operation of the following printers: PCL, Line printer, IBM Proprinter, DIABLO 630, EPSON LQ-850, KPDL. Expansion memory This option is used to increase printer memory. The printer has one expansion slot, and you can install a 8 MB, 16 MB, 32 MB, 64 MB, 128 MB, or 256 MB DIMM (Dual Inline Memory Module). Contact your Kyocera Mita dealer to purchase the DIMM that is best suited for use with this printer. First mode This is an operation mode for the MP tray. Because the MP tray default setting is set to first mode (priority printing from the MP tray), if there is paper inserted in the MP tray, the first paper will always feed from there even if another paper source is selected. First mode is specified as the factory default, but you can change this setting from the KM-NET for Clients. KIR (Kyocera Image Refinement) This is Kyocera Mita's original smoothing function. It uses software to enhance the printer's resolution and produce high-quality printing. The default setting is On. KM-NET for Clients This is a utility that displays a virtual printer operation panel on your computer screen. You can make various settings from the KM-NET for Clients, such as the current paper source and paper size. The KM-NET for Clients is contained on the Kyocera Mita Software Library CD-ROM supplied with the printer. KM-NET VIEWER This is a network management tool that can be used with the printer. You can view information for printers connected to the network using SNMP commands. KM-NET VIEWER is contained on the Kyocera Mita Software Library CD-ROM supplied with the printer. KPDL (Kyocera Printer Description Language) This is Kyocera Mita's version of Adobe PostScript 3. MB (mega byte) This unit is used to express data quantities and memory capacities. 1 MB is equivalent to 1024 KB, or 1,048,576 bytes. Glossary-2