Kyocera TASKalfa 3051ci Printing System (11),(12),(13),(14) Color Printing Gu - Page 17

COLORWISE PRINT OPTIONS 17 NOTE: Use the Black Text and Graphics option only when printing composites, not when printing separations. Color RGB=0,0,0 (All other RGB values are unaffected by the Black Text and Graphics setting.) CMYK=0%,0%,0%,100% (All other CMYK values are unaffected by the Black Text and Graphics setting.) Spot Colors (Spot colors are unaffected by the Black Text and Graphics setting.) Black Text and Graphics = Normal Black Text and Graphics = Pure Black On or Rich Black On RGB=0,0,0 is printed according to the definition for RGB=0,0,0 in the output profile. This may be a rich black using all toners if the output profile specifies a rich black, or may be K-only if the output profile specifies K-only for RGB=0,0,0. The output is affected by the calibration curve. RGB=0,0,0 is printed as K-only, using the black toner (Pure Black On) or 100% K plus 50% Cyan (Rich Black On) using black and cyan toners. All other RGB values are unaffected by the Black Text and Graphics setting. CMYK=0%,0%,0%,100% may be printed as K-only or as a rich black using all toners, depending on the CMYK/Grayscale Source setting. If CMYK/Grayscale Processing Method is Pure Primaries or if CMYK/Grayscale Source is Bypass Conversion, CMYK=0%,0%,0%,100% prints as 100% K and the amount of black toner is limited by the CMYK/Grayscale Source profile and the calibration curve. If CMYK/Grayscale Processing Method is Full (Output GCR), CMYK=0%,0%,0%,100% is printed as a rich black using all toners according to the output profile. The output is affected by the calibration curve. If CMYK/Grayscale Processing Method is Full (Source GCR), CMYK=0%,0%,0%,100% is printed as a rich black using all toners according to the CMYK/Grayscale Source profile. The output is affected by the calibration curve. Setting CMYK/Grayscale Source to ColorWise Off disables the CMYK Source profile and the calibration curve. In this case, the black toner is not limited by the calibration curve. CMYK=0%,0%,0%,100% is printed as K-only, using the black toner (Pure Black On) or 100% K plus 50% Cyan (Rich Black On) using black and cyan toners, regardless of the CMYK/ Grayscale Source and CMYK/Grayscale Processing Method settings. All other CMYK values are unaffected by the Black Text and Graphics setting. Setting CMYK/Grayscale Source to ColorWise Off disables the CMYK source profile and the calibration curve. In this case, the black toner is not limited by the calibration curve. Standard spot color processing Standard spot color processing NOTE: PostScript applications, such as QuarkXPress, may convert elements defined as RGB=0,0,0 to four-color CMYK black before sending the job to the E100. These elements are not affected by the Black Text and Graphics option. For more information, see Fiery Color Reference.