Lexmark Z647 User's Guide for Mac OS 9 - Page 58

Printing a test Test does not print, Z600 Series, Select Default Printer, Control Panels

Get Lexmark Z647 PDF manuals and user guides View all Lexmark Z647 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 58 highlights

• The printer is set as the default printer. To set the printer as the default: 1 From your desktop, double-click the Z600 Series printer icon. 2 From the Printing menu, choose Select Default Printer. After you check these items, try printing a test page. Printing a test page 1 From the Apple menu, choose Control Panels Z600 Series Control Panel. 2 From the Cartridges tab, click Print Test Page. • If the test page prints, the printer is working properly. • If the test page does not print, continue with the following section or refer to the printer software Help for further troubleshooting information. Test page does not print For help, first see "Troubleshooting checklist" on page 51, and then: • If the paper is jammed, see "Clearing paper misfeeds or jams" on page 60. • Make sure the printer is not held or paused. To check the printer status: 1 From your desktop, double-click the Z600 Series printer icon. 2 Make sure the Hold button is not selected. 3 Try printing your test page again. If it still does not print, see: - "Solving printer software installation problems" on page 52 - "Solving network printing problems, if the printer is connected to a network adapter" on page 55 - "Resolving unsuccessful or slow printing" on page 57 Alignment page does not print Make sure: • You completely removed the transparent tape and sticker from the back and bottom of the print cartridges. • You installed the cartridges correctly. For help, see "Install the cartridges" on page 45. • You loaded the paper correctly and did not force the paper into the printer. • If you are connected to a network with a Lexmark adapter, the indicator lights are on. For more information, see the adapter documentation. Resolving unsuccessful or slow printing 58

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
Resolving unsuccessful or slow printing
58
•
The printer is set as the default printer. To set the printer as the default:
1
From your desktop, double-click the
Z600 Series
printer icon.
2
From the Printing menu, choose
Select Default Printer
.
After you check these items, try printing a test page.
Printing a test page
1
From the Apple menu, choose
Control Panels
Z600 Series Control Panel
.
2
From the Cartridges tab, click
Print Test Page
.
•
If the test page prints, the printer is working properly.
•
If the test page does not print, continue with the following section or refer to the printer
software Help for further troubleshooting information.
Test page does not print
For help, first see “Troubleshooting checklist” on page 51, and then:
•
If the paper is jammed, see “Clearing paper misfeeds or jams” on page 60.
•
Make sure the printer is not held or paused. To check the printer status:
1
From your desktop, double-click the
Z600 Series
printer icon.
2
Make sure the
Hold
button is not selected.
3
Try printing your test page again. If it still does not print, see:
–
“Solving printer software installation problems” on page 52
–
“Solving network printing problems, if the printer is connected to a network adapter”
on page 55
–
“Resolving unsuccessful or slow printing” on page 57
Alignment page does not print
Make sure:
•
You completely removed the transparent tape and sticker from the back and bottom of the
print cartridges.
•
You installed the cartridges correctly. For help, see “Install the cartridges” on page 45.
•
You loaded the paper correctly and did not force the paper into the printer.
•
If you are connected to a network with a Lexmark adapter, the indicator lights are on. For
more information, see the adapter documentation.