Linksys SPA921 Cisco SPA9000 Voice System Administration Guide - Page 115
Configuring Local Voice Mail Service on a SPA400, Setup, tab >, Server Port, SPA9000 subscriber ID
UPC - 745883570799
View all Linksys SPA921 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 115 highlights
Administering the SPA400 and Voice Mail Service Configuring a SPA400 for Voice Mail Service 5 Configuring Local Voice Mail Service on a SPA400 You need to configure the voice mail server and set up the voice mail boxes for the users. NOTE The settings on this page correspond to the settings on the SPA9000 Voice > Line page. See "Configuring a Line Interface for a SPA400 (PSTN or Voice Mail)," on page 60. SPA400 > Setup > Voicemail Server SPA9000 > Voice > Line N STEP 1 Connect to the SPA400 administration web server. (See "Connecting to the SPA400 Administration Web Server," on page103.) STEP 2 Click Setup tab > Voicemail Server. STEP 3 Enter the following information: • Server Port: 5090 The voice mail server uses this UDP port to listen for signalling between the SPA400 and the SPA9000. This port must be different from the port number that you entered on the SPA9000 Interface page. • SPA9000 subscriber ID: 8888 The SPA9000 uses the subscriber ID to subscribe to the SPA400 Voice mail Server for obtaining notification. SPA9000 Voice System Administration Guide 113