Linksys SPA921 Cisco SPA9000 Voice System Administration Guide - Page 257

SPA9000 Field Reference Voice tab B Refer Target Bye Delay Referee Bye Delay Refer-To Target Contact Auth INVITE For the Refer Target Bye Delay, enter the appropriate period of time in seconds. Default: 0 For the Referee Bye Delay, enter the appropriate period of time in seconds. Default: 0 To contact the refer-to target, select yes. Otherwise, select no. Default: no When enabled, authorization is required for initial incoming INVITE requests from the SIP proxy. Voice tab > Line page Subscriber Information section Display Name User ID Password Use Auth ID Auth ID Call Capacity Contact List Cfwd No Ans Delay Display name for caller ID. User ID assigned by the ITSP, often the same as the DID. Password for this User ID. To use the authentication ID and password for SIP authentication, select yes. Otherwise, select no to use the user ID and password. Default: no Authentication ID for SIP authentication. Maximum number of calls allowed on this line interface. You can set a value from 1 to 15, or leave the setting as unlimited. Note that the SPA9000 does not distinguish between incoming and outgoing calls when talking about call capacity. NOTE Unlimited = 16. Default: unlimited List of client stations that the SPA9000 alerts when there is an incoming call to the line interface from the ITSP. Delay, in seconds, before the call forwarding of no-answer calls feature is triggered. Default: 20 SPA9000 Voice System Administration Guide 255