Linksys SPA921 Cisco SPA9000 Voice System Administration Guide - Page 43

Basic Administration of the SPA9000 Using the Interactive Voice Response Unit 2 For example, to enter the IP address 191.168.1.105 by keypad, press the following keys: 191*168*1*105. Press the # (pound) key to indicate that you have finished entering the IP address. Then press 1 to save the IP address, or press the * (star) key to cancel your entry and return to the main menu. • If the menu is inactive for more than one minute, the SPA9000 times out. You need to re-enter the menu by pressing ****. STEP 6 To exit the menu, hang up the telephone. The settings that you have saved take effect after you hang up the telephone. The SPA9000 may reboot at this time. Table 1 IVR Options The following table shows the codes that you enter to complete various tasks in the IVR. IVR Action Enter IVR Menu IVR Parameters Menu Choice * * * * None Exit IVR Menu Check DHCP 3948 100 None None Enable/Disable 101 DHCP Check WAN IP 110 Address Enter 0 to enable Enter 1 to disable None Notes Ignore SIT or other tones until you hear, "Linksys configuration menu. Please enter option followed by the pound key or hang-up to exit." The IVR spells "S,T,A,T,I,C" if the setting is for a static IP address or "D,H,C,P" for a DHCP IP address. Requires password IVR announces the current IP address of the WAN port. SPA9000 Voice System Administration Guide 41