Linksys SPA921 Cisco SPA9000 Voice System Administration Guide - Page 36
Setting the Multicast Address, Voice tab > - sip configuration
UPC - 745883570799
View all Linksys SPA921 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
Basic Administration of the SPA9000 Configuring Basic Settings 2 Setting the Multicast Address For administration purposes, the SPA9000 can send the following reboot, restart, page, and ring messages to the group: • Graceful reboot: The device reboots when there are no calls in progress. • Immediate reboot: The device reboots immediately. • Graceful restart: The device restarts when there are no calls in progress. • Immediate restart: The device restarts immediately. • Group page start: One-way audio is sent from the caller to all other phones. • Group page end: An active page is terminated. • Get ringing calls: When a user chooses Group Pickup on a phone, the SPA9000 gathers information about all ringing phones and reports this information to the requesting phone. STEP 1 Connect to the SPA9000 administration web server, and choose Admin access with Advanced settings. (See "Connecting to the SPA9000 Administration Web Server," on page 27). STEP 2 Click Voice tab > SIP. STEP 3 Scroll down to the PBX Parameters section. STEP 4 Enter the correct multicast address in the Multicast Address field. Voice tab > SIP > PBX Parameters Section NOTE The default value is 224.168.168.168:6061. SPA9000 Voice System Administration Guide 34