Linksys SPA921 Cisco SPA9000 Voice System Administration Guide - Page 236
FAX Line Toggle Code, Referral Services Codes
UPC - 745883570799
View all Linksys SPA921 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 236 highlights
SPA9000 Field Reference Voice tab B Attn-Xfer Act Code Modem Line Toggle Code FAX Line Toggle Code If the code is specified, the user must enter it before dialing the third party for a call transfer. Enter the code for a call transfer. Toggles the line to a modem. Default: *99. Modem pass-through mode can be triggered only by pre-dialing this code. Toggles the line to a fax machine. Referral Services Codes Default: #99 These codes tell the SPA9000 what to do when the user places the current call on hold by hook flash and is listening to the second dial tone. One or more *codes can be configured into this parameter, such as *98, or *97|*98|*123, etc. Max length is 79 chars. Each *code (and the following valid target number according to current dial plan) entered on the second dial-tone triggers the SPA9000 to perform a blind transfer to a target number that is prepended by the service *code. For example, after the user dials *98, the SPA9000 plays a special dial tone called the Prompt Tone while waiting for the user the enter a target number (which is checked according to dial plan as in normal dialing). When a complete number is entered, the SPA9000 sends a blind REFER to the holding party with the Refer-To target equals to *98. This feature allows the SPA9000 to hand off a call to an application server to perform further processing, such as call park. The *codes should not conflict with any of the other vertical service codes internally processed by the SPA9000. You can empty the corresponding *code that you do not want to SPA9000 to process. Default: blank SPA9000 Voice System Administration Guide 234