Linksys SPA922 Cisco SPA9000 Voice System Administration Guide - Page 145
Action Instruction, Noinput Instruction
UPC - 745883570836
View all Linksys SPA922 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 145 highlights
Configuring the Auto Attendant Writing an Auto Attendant Script 7 TIP Generally, enter an audio instruction as the first element in the script. In a dialog, if dialog is not been defined, the Auto Attendant does not play a prompt. If it is defined, the Auto Attendant first plays the specified prompt, then executes the action instruction that is described in the next section. Action Instruction The actions include: • goto-The Auto Attendant proceeds to the next dialog in the script. All dialogs are identified by the attribute "id". The value in the id attribute must be unique. Otherwise, the Auto Attendant selects the last valid dialog as the transfer target dialog. EXAMPLE: • xfer-The Auto Attendant blind transfers the caller to the target. EXAMPLE: The name attribute is optional. The target attribute must be a valid target phone number. • exit -When this action is reached, the Auto Attendant is stopped, and the call ends. EXAMPLE: NOTE In one dialog, only one action can be defin0ed. After the xfer or exit action is performed, the Auto Attendant ends automatically. Noinput Instruction The dialog can only be used in the menu dialog and is optional. When it is specified, Auto Attendant executes the audio and action instructions if the user does not input any digits with the value of the parameter, in seconds. If the repeat attribute is set to T, the Auto Attendant plays the menu prompt after playing the prompt specified in the dialog and ignores the action instruction. If the value is F, the Auto Attendant executes the action instruction. The default value of the repeat attribute is F. SPA9000 Voice System Administration Guide 143