Linksys SPA922 Cisco SPA9000 Voice System Administration Guide - Page 241

SPA9000 Field Reference Voice tab B Daylight Saving Time Rule (continued) FXS Port Input Gain FXS Port Output Gain DTMF Playback Level DTMF Playback Length The value is the number of hours, minutes, and/ or seconds to add to the current time during daylight saving time. The value can be preceded by a negative (-) sign if subtraction is desired instead of addition. The value is in this format: [/[+|-]HH:[mm[:ss]]] The value equals any value in the range 1-12 (January-December). The value equals [+|-] any value in the range 1-31. If is 1, it means the on or before the end of the month (in other words the last occurrence of < weekday> in that month). The value equals any value in the range 1-7 (Monday-Sunday). It can also equal 0. If the value is 0, this means that the date to start or end daylight saving is exactly the date given. In that case, the value must not be negative. If the value is not 0 and the value is positive, then daylight saving starts or ends on the value on or after the date given. If the value is not 0 and the value is negative, then daylight saving starts or ends on the value on or before the date given. The abbreviation HH stands for hours (0-23). The abbreviation mm stands for minutes (0-59). The abbreviation ss stands for seconds (0-59). The default Daylight Saving Time Rule is start=4/1/ 7;end=10/-1/7;save=1. Input gain in dB, up to three decimal places. The range is 6.000 to -12.000. Default: -3. Output gain in dB, up to three decimal places. The range is 6.000 to -12.000. The Call Progress Tones and DTMF playback level are not affected by the . Default: -3 Local DTMF playback level in dBm, up to one decimal place. Default: -16.0 Local DTMF playback duration in milliseconds. Default: .1 SPA9000 Voice System Administration Guide 239