Linksys SPA922 Cisco SPA9000 Voice System Administration Guide - Page 200

SPA9000 Field Reference Voice tab B Client Certificate Customization Licenses The status of the client certificate, which authenticates the SPA9000 for use in the ITSP network For an remote configuration (RC) unit, this field indicates whether the unit has been customized or not. Pending indicates a new RC unit that is ready for provisioning. If the unit has already retrieved its customized profile, this field displays the name of the company that provisioned the unit. When populated with the value K0, indicates that the SPA9000 is licensed for up to 16 users; if this field is blank, install firmware version 5.2.5 or higher. Voice tab > Info page > System Status section Current Time Elapsed Time The current date and time of the system; for example, 10/3/ 2003 16:43:00 The total time elapsed since the last reboot of the system; for example, 25 days and 18:12:36 Voice tab > Info page > FXS 1/2 Status section Hook State Message Waiting Call Back Active Last Called Number Last Caller Number Call 1/2 State Call 1/2 Tone Call 1/2 Encoder The readiness of the device that is connected to the corresponding Phone port on the SPA9000 • On: Ready for use • Off: In use Indicates whether the station assigned to the FXS port has new voicemail waiting: Yes or No Indicates whether a call back request is in progress: Yes or No Last number called Number of the last caller if available from caller ID, example 4085551212 Status of the call:, Ringing, Idle, or Connected Type of tone used by the call, for example Ring Back 2 for inbound call or None for outbound call Codec used for encoding SPA9000 Voice System Administration Guide 198