Linksys SPA922 Cisco SPA9000 Voice System Administration Guide - Page 227

SPA9000 Field Reference Voice tab B Second Dial Tone Outside Dial Tone Prompt Tone Busy Tone Reorder Tone Off Hook Warning Tone Ring Back Tone Confirm Tone SIT1 Tone SIT2 Tone Alternative to the Dial Tone when the user dials a three-way call. Default: 420@-19,520@-19;10(*/0/1+2) Alternative to the Dial Tone. It prompts the user to enter an external phone number, as opposed to an internal extension. It is triggered by a, (comma) character encountered in the dial plan. Default: 420@-16;10(*/0/1) Prompts the user to enter a call forwarding phone number. Default: 520@-19,620@-19;10(*/0/1+2) Played when a 486 RSC is received for an outbound call. Default: 480@-19,620@-19;10(.5/.5/1+2) Played when an outbound call has failed or after the far end hangs up during an established call. Reorder Tone is played automatically when or any of its alternatives times out. Default: 480@-19,620@-19;10(.25/.25/1+2) Played when the caller has not properly placed the handset on the cradle. Off Hook Warning Tone is played when Reorder Tone times out. Default: 480@10,620@0;10(.125/.125/1+2) Played during an outbound call when the far end is ringing. Default: 440@-19,480@-19;*(2/4/1+2) Brief tone to notify the user that the last input value has been accepted. Default: 600@-16; 1(.25/.25/1) Alternative to the Reorder Tone played when an error occurs as a caller makes an outbound call. The RSC to trigger this tone is configurable on the SIP screen. Default: 985@-16,1428@-16,1777@-16;20(.380/0/1,.380/ 0/2,.380/0/3,0/4/0) Alternative to the Reorder Tone played when an error occurs as a caller makes an outbound call. The response status code (RSC) to trigger this tone is configurable on the SIP screen. Default: 914@-16,1371@-16,1777@-16;20(.274/0/1,.274/ 0/2,.380/0/3,0/4/0) SPA9000 Voice System Administration Guide 225