Linksys SPA922 Cisco SPA9000 Voice System Administration Guide - Page 34

Basic Administration of the SPA9000 Configuring Basic Settings 2 Enter these values in the following format: //[/ HH[:mm[:ss]]] • : 1-12 (January-December) • : 1-31 • : Optional. If included, this value causes the rule to take effect on a particular day of the week before or after the specified date. Use the values 1-7 to represent the days Monday (1) through Sunday (7). Omit this parameter or enter 0 to cause the rule to take effect exactly on the specified date. If is not 0 and the value is positive, then daylight saving time starts or ends on on or after the specified date. If is not 0 and the value is negative, then daylight saving time starts or ends on on or before the specified date. • HH:mm:ss: Optional. The time of day when the setting takes effect, in hours (0-23), minutes (0-59), and seconds (0-59) • : The number of hours (and optionally minutes and/or seconds) to add to the NTP server time during daylight saving time. Enter a negative (-) sign before if subtraction is desired instead of addition. Entering the Daylight Saving Time Rule Follow this procedure to configure daylight saving time on your SPA9000 Voice System. STEP 1 Connect to the SPA9000 administration web server, and choose Admin access with Advanced settings. (See "Connecting to the SPA9000 Administration Web Server," on page 27). STEP 2 Click Voice tab > Regional. STEP 3 Scroll down to the Miscellaneous section. STEP 4 Enter the rule in the Daylight Saving Time Rule field. STEP 5 Click Submit All Changes. SPA9000 Voice System Administration Guide 32