Linksys SPA922 Cisco SPA9000 Voice System Administration Guide - Page 67
Setting the Call Capacity Parameter, > Line, Submit All Changes
UPC - 745883570836
View all Linksys SPA922 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 67 highlights
Configuring Phone Lines and Calling Routing Behavior Configuring Line Interfaces on the SPA9000 4 Setting the Call Capacity Parameter You can set the maximum total number of incoming and outgoing calls on each line interface. The default value is unlimited. You can set a value from 1 to 15, or leave the setting as unlimited. NOTE The SPA9000 does not distinguish between incoming and outgoing calls for call capacity. STEP 1 Start Internet Explorer, and then enter the IP address of the SPA9000. Click Admin Login and then click Advanced. STEP 2 Click Voice tab > Line N, where N represents the line interface number. STEP 3 Scroll down to the Subscriber Information section. From the Call Capacity drop-down list, choose the maximum number of calls to allow. SPA9000 Voice > Line: Subscriber Information STEP 4 Click Submit All Changes. SPA9000 Voice System Administration Guide 65