Linksys SPA922 Cisco SPA9000 Voice System Administration Guide - Page 93
Entering a Contact List Rule, Voice tab > Line, Submit All Changes
UPC - 745883570836
View all Linksys SPA922 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 93 highlights
Configuring Phone Lines and Calling Routing Behavior Managing Inbound Calls with the Contact List 4 Entering a Contact List Rule Use the following procedure to enter a contact list rule. STEP 1 Connect to the SPA9000 administration web server, and choose Admin access with Advanced settings. STEP 2 Click Voice tab > Line N, where N represents the line interface number. STEP 3 Scroll down to the Subscriber Information section. SPA9000 Voice > Line: Subscriber Information STEP 4 Enter the desired rules in the Contact List field. For more information, see "Example Contact List Rules," on page 86 and "Entering a Contact List Rule," on page 91. NOTE The maximum length of the parameter is 383 characters. STEP 5 If you included a call forward rule, modify the Cfwd No Ans Delay parameter to specify the number of seconds that elapse before a call is considered to be unanswered. STEP 6 Click Submit All Changes. The SPA9000 reboots. STEP 7 To verify your progress, make an inbound call and verify that the call is handled as you intended. SPA9000 Voice System Administration Guide 91