Linksys SPA922 Cisco SPA9000 Voice System Administration Guide - Page 64
SIP Port, Contact List, Submit All Changes, Mailbox Deposit URL, Mailbox Manage URL
UPC - 745883570836
View all Linksys SPA922 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 64 highlights
Configuring Phone Lines and Calling Routing Behavior Configuring Line Interfaces on the SPA9000 4 STEP 5 Also in the Proxy and Registration section, enter the following settings to ensure that calls can be transferred and forwarded to the voice mail server: • Set VMSP Bridge to all (required if this line is being used for SPA400 voice mail service). • Set XFER Bridge Mode to all. • Set CFWD Bridge Mode to all. • SIP Port: You can keep the default value. Each line must have a unique SIP port (5060 for Line 1, 5061 for Line 2, 5062 for Line 3, 5064 for Line 4). • Contact List: The default value is aa, for the Auto Attendant. As a general practice, you should leave the default value until after you confirm that the line is registered in the Voice > Info page, Line Status section, Registration State field. Then you can configure the contact list. For more information, see "Managing Inbound Calls with the Contact List," on page 85. STEP 6 Proceed as needed: • If you are using this SPA400 for voice mail service, continue to Step 7. • If you are using this SPA400 for PSTN access only, click Submit All Changes to finish this procedure. You will need to configure the SPA400. For more information, see "Configuring a SPA400 to Interoperate with the SPA9000," on page108 and "Configuring a SPA400 for PSTN Access," on page111. STEP 7 Enter the following settings for the SPA400 voice mail service: • Mailbox Deposit URL: 900@:5090 The SPA9000 uses this address to deposit voice mail on the voice mail server. • Mailbox Manage URL: 800@:5090 The SPA9000 uses this address to access voice mail on the voice mail server. • Mailbox Subscribe URL: 8888@:5090 The SPA9000 uses this address to subscribe to voice mail service on the voice mail server. • Mailbox Subscribe Expires: 30 This setting ensures that the SPA9000 and the SPA400 voice mail server are resynchronized every 30 seconds, and prevents problems when you make changes in the settings. SPA9000 Voice System Administration Guide 62