Netgear FM114P FR114W Reference Manual - Page 31

Verifying Connections, The INTERNET LINK/ACT LED is lit.

Get Netgear FM114P - Cable/DSL ProSafe 802.11b Wireless Firewall Router PDF manuals and user guides
UPC - 606449024029
View all Netgear FM114P manuals
Add to My Manuals
Save this manual to your list of manuals

Page 31 highlights

Reference Manual for the Model FR114P, FR114W and FM114P Cable/DSL ProSafe Firewall Verifying Connections After applying power to the firewall, complete the following steps to verify the connections to it: 1. When power is first applied, verify that the POWER LED is on. 2. Verify that the TEST LED turns on within a few seconds. 3. After approximately 10 seconds, verify that: a. The TEST LED has turned off. b. The LOCAL LINK/ACT LEDs are lit for any local ports that are connected. c. The INTERNET LINK/ACT LED is lit. If a LINK/ACT LED is lit, a link has been established to the connected device. 4. If any port is connected to a 100 Mbps device, verify that the 100 LED for that port is lit. The firewall is now properly attached to the network. Next, you need to prepare your network to access the Internet through the firewall. See the following chapter. Setting Up the Hardware 2-7

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
Reference Manual for the Model FR114P, FR114W and FM114P Cable/DSL ProSafe Firewall
Setting Up the Hardware
2-7
Verifying Connections
After applying power to the firewall, complete the following steps to verify the connections to it:
1.
When power is first applied, verify that the POWER LED is on.
2.
Verify that the TEST LED turns on within a few seconds.
3.
After approximately 10 seconds, verify that:
a.
The TEST LED has turned off.
b.
The LOCAL LINK/ACT LEDs are lit for any local ports that are connected.
c.
The INTERNET LINK/ACT LED is lit.
If a LINK/ACT LED is lit, a link has been established to the connected device.
4.
If any port is connected to a 100 Mbps device, verify that the 100 LED for that port is lit.
The firewall is now properly attached to the network. Next, you need to prepare your network to
access the Internet through the firewall. See the following chapter.