Netgear WNDR3700 WNDR3700 User Manual - Page 139
Restoring the Default Configuration and Password, password - amber power light
UPC - 606449061314
View all Netgear WNDR3700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 139 highlights
RangeMax™ Dual Band Wireless-N Gigabit Router WNDR3700 User Manual Restoring the Default Configuration and Password This section explains how to restore the factory default configuration settings, changing the router's administration password back to password. You can erase the current configuration and restore factory defaults in two ways: • Use the Erase function of the router (see "Erasing the Configuration" on page 4-12). • Use the Reset button on the bottom of the router. Use this method for cases when the administration password or IP address is not known. To restore the factory default configuration settings when you do not know the administration password or IP address, you must use the restore settings button on the bottom of the router. 1. Press and hold the restore settings button for over 5 seconds until the Power light turns to blinking amber. 2. Release the restore settings button, and wait for the router to reboot. If the wireless router fails to restart, or the green Power light continues to blink, the unit might be defective. If the error persists, you might have a hardware problem and should contact Technical Support at http://www.netgear.com/support. Troubleshooting v1.3, October 2009 8-14