Netgear WNDR3700 WNDR3700 User Manual - Page 93
Add Service, Service Name, Service User, Single address, TCP/UDP, Triggering Port, Connection Type
UPC - 606449061314
View all Netgear WNDR3700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 93 highlights
RangeMax™ Dual Band Wireless-N Gigabit Router WNDR3700 User Manual 5. Click Add Service. Figure 5-9 6. In the Service Name field, type a descriptive service name. 7. In the Service User field, select Any (the default) to allow this service to be used by any computer on the Internet. Otherwise, select Single address, and enter the IP address of one computer to restrict the service to a particular computer. 8. Select the service type, either TCP or UDP or both (TCP/UDP). If you are not sure, select TCP/UDP. 9. In the Triggering Port field, enter the number of the outbound traffic port that will cause the inbound ports to be opened. 10. Enter the inbound connection port information in the Connection Type, Starting Port, and Ending Port fields. 11. Click Apply. The service appears in the Port Triggering Portmap table. Customizing Your Network Settings v1.3, October 2009 5-21