Nikon COOLPIX L120 User Manual - Page 125
Vibration Reduction, Notes on Vibration Reduction, Using Vibration Reduction with Movies
View all Nikon COOLPIX L120 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 125 highlights
Setup Menu Vibration Reduction d button M z (Setup menu) (A 104) M Vibration reduction Specify the vibration reduction setting for shooting still images. Vibration reduction effectively corrects blur that commonly occurs when shooting with zooming or at slow shutter speeds. Set vibration reduction to Off when using a tripod to stabilize the camera during shooting. V On (hybrid) Image-sensor shift vibration reduction reduces the effects of camera shake. Additionally, electronic vibration reduction is used to process images and remove the effects of camera shake in the following situations. • When the flash does not fire • When the shutter speed is slower than 1/60 second (at the maximum wide-angle position) or 1/125 second (at the maximum telephoto position) • When Self-timer is disabled • When Continuous is set to Single • When ISO sensitivity is set to 200 or less g On (default setting) Image-sensor shift vibration reduction reduces the effects of camera shake. k Off Vibration reduction is disabled. Basic Camera Setup The vibration reduction setting can be confirmed in the monitor during shooting (A 8, 21) (When it is set to Off, no icon is displayed). B Notes on Vibration Reduction • Vibration reduction may take a few seconds to activate after the power is turned on, or the camera enters shooting mode from playback mode. Wait until the display stabilizes before shooting. • Due to characteristics of the vibration reduction function, images displayed on the camera's monitor immediately after shooting may appear blurry. • Vibration reduction may be unable to completely eliminate the effects of camera shake in some situations. • When set to On (hybrid), electronic vibration reduction may not reduce the effects of camera shake if the amount of vibration is very small or very large. • When set to On (hybrid), electronic vibration reduction does not function if shutter speed is fast or very slow. • When set to On (hybrid), the camera automatically releases the shutter two times for each shot and processes the image, therefore it takes more time to save captured images. The Shutter sound (A 115) will be heard only once. Only one image is saved. D Using Vibration Reduction with Movies Vibration reduction for movie recording can be set with Electronic VR (A 85) in the movie menu (A 82). 113